Chyron infinit! series, Operation Manual

Page: 484 / 978

CHYRON Corporation
Function Keys 12-18 Revision D
To activate Keystroke Capture:
[ ] 1. Press
CNTL
, then a Function Key. The
Function Key list is displayed.
[ ] 2. To start a new list, leave the cursor in the Step
column at
Step 0
. If you are editing a list,
place the cursor on the step at which you want
to add new steps. Any existing keystrokes from
this step on are overwritten.
[ ] 3. Press C or select Capture . The Prompts
Monitor returns to the Message Compose main
menu.
Function Key x Step: 0 appears on the
Prompt Line.
x
is the Function Key number.
[ ] 4. Compose your sequence. Each keystroke is
executed and saved in the selected Function
Key. The Step number on the Prompt Line
increments after each keystroke.
[ ] 5. To edit the list, press CNTL , then the Function
Key to enter and examine the list. After
editing, place the cursor in the Step column,
then press
Q
or select
Quit
to exit the list.
[ ] 6. To execute the list, press the Function Key or
the GPI activator (§2.5) for that key.
5HDGLQJ%DFN)XQFWLRQ.H\V
To read back a Function Key from Message Compose:
• From the Message Compose main menu, enter the ID
of the recorded Function Key, then press
READ
.
The Function Key is loaded into its original Function
Key.
When a Function Key is read back while in the Message
Compose main menu, it overwrites any sequence cur-
rently loaded in that Function Key.