Chyron infinit! series, Operation Manual

Page: 659 / 978

iNFiNiT! Family Operation Manual
Revision D 16-7 Mix Effects
The speed of the effect gradually increases to
the set speed, then slows down gradually to
completion. Transition is executed within the
duration set in
Speed .
The effect starts and stops at the set speed, with
no acceleration or deceleration. Transition is
executed within the duration set in
Speed .
2XWSXW3HUFHQWDJH/HYHOV
The Output Percentage level of the video signal of each
buffer is controlled by a Percent slider. Output Percent-
age levels can be set from
0 to 100 inclusive.
•
0
: Output Percentage level of the video signal is
0
.
The image cannot be seen.
• 100 : Output Percentage level of the video signal is
100
. Image appears completely opaque, and covers
any image that is behind it.
• 1 - 99 : Image appears to be very transparent ( 1 ) to
almost completely opaque (
99
). Other images set
behind these images can show through.
Cursor to the slider you want to adjust. There are three
ways to adjust a slider:
• Press CLR . Enter a value between 0 and 100 using
the Address Keypad, then press .
• Press
SHIFT CHAR
ÌÍ
as many times as it is nec-
essary to reach the desired Output Percentage level.
• Use the mouse to drag the Percent slider to the
desired Output Percentage level.
Ease: In/Out
Ease: None