Chrysler 300 2021 Owner'S Manual Download Page 35

Page: 35 / 312

GETTING TO KNOW YOUR VEHICLE

Power Lumbar — If Equipped

Vehicles equipped with power driver or

passenger seats may also be equipped with

power lumbar. The power lumbar switch is

located on the outboard side of the power seat.

Push the switch forward to increase the lumbar

support. Push the switch rearward to decrease

the lumbar support. Pushing upward or

downward on the switch will raise and lower the

position of the support.

Power Lumbar Switch

Easy Entry/Exit Seat — If Equipped

This feature provides automatic driver seat

positioning to enhance driver mobility when

entering and exiting the vehicle.
The distance the driver seat moves depends on

where you have the driver seat positioned when

you place the vehicle’s ignition in the OFF

position.



When you place the vehicle’s ignition in the

OFF position, the driver seat will move about

2.4 inches (60 mm) rearward if the driver

seat position is greater than or equal to

2.7 inches (67.7 mm) forward of the rear

stop. The seat will return to its previously set

position when you place the vehicle’s ignition

in the ACC or RUN position.



The Easy Entry/Easy Exit feature is disabled

when the driver seat position is less than 0.9

of an inch (22.7 mm) forward of the rear

stop. At this position, there is no benefit to

the driver by moving the seat for Easy Exit or

Easy Entry.

WARNING!



Adjusting a seat while driving may be

dangerous. Moving a seat while driving

could result in loss of control which could

cause a collision and serious injury or

death.



Seats should be adjusted before fastening

the seat belts and while the vehicle is

parked. Serious injury or death could result

from a poorly adjusted seat belt.



Do not ride with the seatback reclined so

that the shoulder belt is no longer resting

against your chest. In a collision you could

slide under the seat belt, which could result

in serious injury or death.

CAUTION!

Do not place any article under a power seat

or impede its ability to move as it may cause

damage to the seat controls. Seat travel may

become limited if movement is stopped by an

obstruction in the seat’s path.

21_LX_OM_EN_USC_t.book Page 33

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands