Chrysler 300 2021 Owner'S Manual Download Page 172

Page: 172 / 312

170

SAFETY

Blind Spot Alert Off
When the BSM system is turned off there will be

no visual or audible alerts from either the BSM

or RCP systems.

NOTE:

The BSM system will store the current operating

mode when the vehicle is shut off. Each time

the vehicle is started the previously stored

mode will be recalled and used.

ORWARD

OLLISION

ARNING

(FCW)

ITH

ITIGATION

PERATION

— I

QUIPPED

FCW with Mitigation provides the driver with

audible warnings, visual warnings (within the

instrument cluster display), and may apply a

brake jerk to warn the driver when it detects a

potential frontal collision. The warnings and

limited braking are intended to provide the

driver with enough time to react, avoid or

mitigate the potential collision.

NOTE:

FCW monitors the information from the forward

looking sensors, as well as the Electronic

Stability Control (ESC) system, to calculate the

probability of a forward collision. When the

system determines that a forward collision is

probable, the driver will be provided with

audible and visual warnings and may provide a

brake jerk warning. If the driver does not take

action based upon these progressive warnings,

then the system will provide a limited level of

active braking to help slow the vehicle and miti

gate the potential forward collision. If the driver

reacts to the warnings by braking and the

system determines that the driver intends to

avoid the collision by braking but has not

applied sufficient brake force, the system will

compensate and provide additional brake force

as required. If a Forward Collision Warning with

Mitigation event begins at a speed below

20 mph (32 km/h), the system may provide the

maximum or partial braking to mitigate the

potential forward collision. If the Forward Colli

sion Warning with Mitigation event stops the

vehicle completely, the system will hold the

vehicle at standstill for two seconds and then

release the brakes.

FCW Message

When the system determines a collision with

the vehicle in front of you is no longer probable,

the warning message will be deactivated

page 298.

NOTE:



The minimum speed for FCW activation is

1 mph (2 km/h).



The FCW alerts may be triggered on objects

other than vehicles such as guard rails or

sign posts based on the course prediction.

This is expected and is a part of normal FCW

activation and functionality.

21_LX_OM_EN_USC_t.book Page 170

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands