Chrysler 300 2021 Owner'S Manual Download Page 97

Page: 97 / 312

STARTING AND OPERATING

3. Push the ENGINE START/STOP button a

second time to place the ignition to the RUN

mode.

4. Push the ENGINE START/STOP button a

third time to return the ignition to the OFF

mode.

UTO

ARK

AutoPark is a supplemental feature to assist in

placing the vehicle in PARK should the

situations on the following pages occur. It is a

back up system and should not be relied upon

as the primary method by which the driver shifts

the vehicle into PARK.
The conditions under which AutoPark will

engage are outlined on the following pages.

If the vehicle is not in PARK and the driver turns

off the engine, the vehicle may AutoPark.
AutoPark will engage when all of these

conditions are met:



Vehicle is equipped with a rotary selector and

an eight speed transmission



Vehicle is not in PARK



Vehicle speed is 1.2 mph (1.9 km/h) or less



Ignition switched from RUN to ACC

NOTE:

For Keyless Enter-N-Go equipped vehicles, the

engine will turn off and the ignition switch will

change to ACC Mode.

WARNING!



Driver inattention could lead to failure to

place the vehicle in PARK. ALWAYS DO A

VISUAL CHECK that your vehicle is in PARK

by verifying that a solid (not blinking) “P” is

indicated in the instrument cluster display

and near the gear selector. If the “P” indi

cator is blinking, your vehicle is not in

PARK. As an added precaution, always

apply the parking brake when exiting the

vehicle.



AutoPark is a supplemental feature. It is not

designed to replace the need to shift your

vehicle into PARK. It is a back up system

and should not be relied upon as the

primary method by which the driver shifts

the vehicle into PARK.

21_LX_OM_EN_USC_t.book Page 95

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands