Chrysler 300 2021 Owner'S Manual Download Page 264

Page: 264 / 312

262

SERVICING AND MAINTENANCE

7. Reinstall the access cap making sure it is

seated into the housing and turn cap

clockwise to engage locking lugs. Visually,

you should be unable to see the blue O-ring

gasket. The access cap should be uniformly

seated and you should not be able to pull

the access cap off without turning it

counterclockwise.

Front Turn Signal Lamps

See steps below to replace:

1. Open the hood.

NOTE:

Removal of the air cleaner filter housing may be

necessary prior to replacing bulbs in the head

lamp assembly on the driver side of the vehicle.

2. Reach behind the headlamp housing to

access the turn signal (inboard) bulb cap.

Turn Signal Bulb Cap

3. Firmly grab the cap and rotate it counter

clockwise to unlock it.

Turn Signal Bulb Location

4. Squeeze the two tabs on the side of the bulb

socket and pull straight out from the lamp

assembly.

5. Disconnect the bulb from the wiring

connector and install the replacement bulb.

6. Install the bulb and connector assembly

straight into the lamp until it locks in place.

7. Install the turn signal bulb cap in the

headlamp housing and rotate clockwise to

lock in place.

Front Fog Lamps

The Front Fog Lamps use LED sources that are

not serviceable separately. The Front Fog Lamp

must be replaced as an assembly; see an

authorized dealer.

Front/Rear Side Marker Lamps

The Side Markers use LED lamps that are not

serviceable separately. The Side Markers must

be replaced as an assembly, see an authorized

dealer.

CAUTION!

If the access cap is not installed correctly

after bulb replacement, the lamp becomes

susceptible to dust, condensation, and water

intrusion. This may ultimately lead to an

inoperative lamp. If the access cap cannot be

installed correctly, please return to an

authorized dealer for proper repair or access

cap replacement if necessary.

21_LX_OM_EN_USC_t.book Page 262

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands