Chrysler 300 2021 Owner'S Manual Download Page 146

Page: 146 / 312

144

MULTIMEDIA

Privacy of any wireless and wired

communications cannot be assured. Third

parties may unlawfully intercept information

and private communications without your

consent. For further information, refer to “Data

Collection & Privacy” in your Uconnect Owner’s

Manual Supplement or “Onboard Diagnostic

System (OBD II) Cybersecurity”

page 91.

UCONNECT SETTINGS

The Uconnect system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the

instrument panel. These buttons allow you to

access and change the Customer

Programmable Features. Many features can

vary by vehicle.
Buttons on the faceplate are located below

and/or beside the Uconnect system in the

center of the instrument panel. In addition,

there is a Scroll/Enter control knob located on

the right side. Turn the control knob to scroll

through menus and change settings. Push the

center of the control knob one or more times to

select or change a setting.

Your Uconnect system may also have Screen

Off and Mute buttons on the faceplate.
Push the Screen Off button on the faceplate to

turn off the Uconnect screen. Push the button

again or tap the screen to turn the screen on.
Press the Back Arrow button to exit out of a

Menu or certain option on the Uconnect system.

USTOMER

ROGRAMMABLE

EATURES

— U

CONNECT

4C/4C NAV S

ETTINGS

Uconnect 4C/4C NAV With 8.4-inch Display Buttons

On The Touchscreen And Buttons On The Faceplate

Press the Apps button, then press the

Settings button on the touchscreen to display

the menu setting screen. In this menu, the

Uconnect system allows you to access all of the

available programmable features.

NOTE:

Depending on the vehicle’s options, feature

settings may vary.

When making a selection, press the button on

the touchscreen to enter the desired menu.

Once in the desired menu, press and release

the preferred setting “option” until a check

mark appears next to the setting, showing that

setting has been selected. Once the setting is

complete, press the X button on the

touchscreen to close out of the settings screen.

Pressing the Up or Down Arrow button on the

right side of the screen will allow you to toggle

up or down through the available settings.
The following tables list the settings that may be

found within the Uconnect 4C/4C NAV radio,

along with the selectable options pertaining to

each setting.

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

21_LX_OM_EN_USC_t.book Page 144

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands