Chrysler 300 2021 Owner'S Manual Download Page 208

Page: 208 / 312

206

SAFETY

Center Tether Attachment

1. If adjustable, lower the adjustable center

head restraint to the full down position.

2. Route the tether strap over the seatback

and head restraint.

3. Attach the tether strap hook of the child

restraint to the center tether anchorage

located in the panel between the rear

seatback and the rear window.

4. Remove slack in the tether strap according

to the child restraint manufacturer’s

instructions.

SAFETY TIPS

RANSPORTING

ASSENGERS

NEVER TRANSPORT PASSENGERS IN THE

CARGO AREA.

RANSPORTING

ETS

Air Bags deploying in the front seat could harm

your pet. An unrestrained pet will be thrown

about and possibly injured, or injure a

passenger during panic braking or in a collision.
Pets should be restrained in the rear seat (if

equipped) in pet harnesses or pet carriers that

are secured by seat belts.

AFETY

HECKS

HOULD

AKE

NSIDE

EHICLE

Seat Belts

Inspect the seat belt system periodically,

checking for cuts, frays, and loose parts.

Damaged parts must be replaced immediately.

Do not disassemble or modify the system.
Front seat belt assemblies must be replaced

after a collision. Rear seat belt assemblies must

be replaced after a collision if they have been

damaged (i.e., bent retractor, torn webbing,

etc.). If there is any question regarding seat belt

or retractor condition, replace the seat belt.

Air Bag Warning Light

The Air Bag Warning Light will turn on for four

to eight seconds as a bulb check when the

ignition switch is first placed in the ON/RUN

position. If the light is either not on during

starting, stays on, or turns on while driving, have

the system inspected at an authorized dealer as

soon as possible. After the bulb check, this light

will illuminate with a single chime when a fault

WARNING!



Do not leave children or animals inside

parked vehicles in hot weather. Interior heat

build-up may cause serious injury or death.



It is extremely dangerous to ride in a cargo

area, inside or outside of a vehicle. In a

collision, people riding in these areas are

more likely to be seriously injured or killed.



Do not allow people to ride in any area of

your vehicle that is not equipped with seats

and seat belts.



Be sure everyone in your vehicle is in a seat

and using a seat belt properly.

21_LX_OM_EN_USC_t.book Page 206

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands