Chrysler 300 2021 Owner'S Manual Download Page 277

Page: 277 / 312

SERVICING AND MAINTENANCE

275

(Continued)

It is recommended to replace the two front tires

or two rear tires as a pair. Replacing just one tire

can seriously affect your vehicle’s handling. If

you ever replace a wheel, make sure that the

wheel’s specifications match those of the

original wheels.
It is recommended you contact an authorized

tire dealer or original equipment dealer with any

questions you may have on tire specifications or

capability. Failure to use equivalent

replacement tires may adversely affect the

safety, handling, and ride of your vehicle.

IRE

YPES

All Season Tires — If Equipped

All Season tires provide traction for all seasons

(Spring, Summer, Autumn, and Winter). Traction

levels may vary between different all season

tires. All season tires can be identified by the

M+S, M&S, M/S or MS designation on the tire

sidewall. Use all season tires only in sets of four;

failure to do so may adversely affect the safety

and handling of your vehicle.

Summer Or Three Season Tires —

If Equipped

Summer tires provide traction in both wet and

dry conditions, and are not intended to be

driven in snow or on ice. If your vehicle is

equipped with Summer tires, be aware these

tires are not designed for Winter or cold driving

conditions. Install Winter tires on your vehicle

when ambient temperatures are less than 40°F

(5°C) or if roads are covered with ice or snow.

For more information, contact an authorized

dealer.
Summer tires do not contain the all season

designation or mountain/snowflake symbol on

the tire sidewall. Use Summer tires only in sets

of four; failure to do so may adversely affect the

safety and handling of your vehicle.

WARNING!



Do not use a tire, wheel size, load rating, or

speed rating other than that specified for

your vehicle. Some combinations of unap

proved tires and wheels may change

suspension dimensions and performance

characteristics, resulting in changes to

steering, handling, and braking of your

vehicle. This can cause unpredictable

handling and stress to steering and

suspension components. You could lose

control and have a collision resulting in

serious injury or death. Use only the tire and

wheel sizes with load ratings approved for

your vehicle.



Never use a tire with a smaller load index or

capacity, other than what was originally

equipped on your vehicle. Using a tire with

a smaller load index could result in tire

overloading and failure. You could lose

control and have a collision.



Failure to equip your vehicle with tires

having adequate speed capability can

result in sudden tire failure and loss of

vehicle control.

CAUTION!

Replacing original tires with tires of a

different size may result in false speedometer

and odometer readings.

WARNING!

(Continued)

WARNING!

Do not use Summer tires in snow/ice

conditions. You could lose vehicle control,

resulting in severe injury or death. Driving too

fast for conditions also creates the possibility

of loss of vehicle control.

21_LX_OM_EN_USC_t.book Page 275

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands