Chrysler 300 2021 Owner'S Manual Download Page 49

Page: 49 / 312

GETTING TO KNOW YOUR VEHICLE

vehicle specific light and automatically switches

from high beams to low beams until the

approaching vehicle is out of view.

NOTE:



The Automatic High Beam Headlamp Control

can be turned on or off by selecting or dese

lecting “Auto High Beam” within Uconnect

Settings

page 144, as well as turning the

headlight switch to the AUTO position.



Broken, muddy, or obstructed headlights and

taillights of vehicles in the field of view will

cause headlights to remain on longer (closer to

the vehicle). Also, dirt, film, and other obstruc

tions on the windshield or camera lens will

cause the system to function improperly.



If the windshield or Automatic High Beam

Headlamp Control mirror is replaced, the

mirror must be re-aimed to ensure proper

performance. See a local authorized dealer.

LASH

-T

-P

ASS

You can signal another vehicle with your

headlights by lightly pulling the multifunction

lever toward you. This will cause the high beam

headlights to turn on, and remain on, until the

lever is released.

UTOMATIC

EADLIGHTS

This system automatically turns the headlights

on or off according to ambient light levels. To

turn the system on, rotate the headlight switch

counterclockwise to the AUTO position. When

the system is on, the headlight time delay

feature is also on. This means the headlights

will stay on for up to 90 seconds after placing

the ignition in the OFF position. The headlight

time delay can be programmed 0/30/60/90

seconds within Uconnect Settings

page 144.

To turn the automatic system off, move the

headlight switch out of the AUTO position.

NOTE:

The engine must be running before the head

lights will come on in the automatic mode.

ARKING

IGHTS

To turn on the parking lights and instrument

panel lights, rotate the headlight switch

clockwise. To turn off the parking lights, rotate

the headlight switch back to the O (off) position.

NOTE:

For vehicles sold in Canada, rotate the head

light switch to the AUTO position to turn off the

parking lights.

EADLIGHTS

ITH

IPERS

If your vehicle is equipped with Automatic

Headlights, it also has this

customer-programmable feature. When your

headlights are in the automatic mode and the

engine is running, they will automatically turn

on when the wiper system is on. This feature is

programmable through the Uconnect system

page 144.

NOTE:

When your headlights come on during the

daytime, the instrument panel lights will auto

matically dim to the lower nighttime intensity.

21_LX_OM_EN_USC_t.book Page 47

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands