Chrysler 300 2021 Owner'S Manual Download Page 212

Page: 212 / 312

210

IN CASE OF EMERGENCY

HAZARD WARNING FLASHERS

The Hazard Warning Flashers switch is located

on the switch bank just above the climate

controls.

Hazard Warning Flashers Switch

Push the switch to turn on the Hazard Warning

Flashers. When the switch is activated, all

directional turn signals will flash on and off to

warn oncoming traffic of an emergency. Push

the switch a second time to turn off the Hazard

Warning Flashers.

This is an emergency warning system and it

should not be used when the vehicle is in

motion. Use it when your vehicle is disabled and

it is creating a safety hazard for other motorists.
When you must leave the vehicle to seek

assistance, the Hazard Warning Flashers will

continue to operate even though the ignition is

placed in the OFF position.

NOTE:

With extended use, the Hazard Warning

Flashers may discharge the battery.

ASSIST AND SOS MIRROR — IF EQUIPPED

Assist And SOS Mirror

If equipped, the rearview mirror contains an

ASSIST and a SOS button.

NOTE:



Your vehicle may be transmitting data as

authorized by the subscriber

page 298.



The SOS and ASSIST buttons will only func

tion if you are connected to an operable LTE

(voice/data) or 4G (data) network. Other

Uconnect services will only be operable if

WARNING!

ALWAYS obey traffic laws and pay attention to

the road. ALWAYS drive safely with your hands

on the steering wheel. You have full

responsibility and assume all risks related to

the use of the Uconnect and SiriusXM

Guardian™ features and applications in this

vehicle. Only use Uconnect features and

SiriusXM Guardian™ services when it is safe

to do so. Failure to do so may result in an

accident involving serious injury or death.

21_LX_OM_EN_USC_t.book Page 210

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands