Chrysler 300 2021 Owner'S Manual Download Page 182

Page: 182 / 312

180

SAFETY

3. When the seat belt is long enough to fit,

insert the latch plate into the buckle until

you hear a “click.”

Inserting Latch Plate Into Buckle

4. Position the lap belt so that it is snug and

lies low across your hips, below your

abdomen. To remove slack in the lap belt

portion, pull up on the shoulder belt. To

loosen the lap belt if it is too tight, tilt the

latch plate and pull on the lap belt. A snug

seat belt reduces the risk of sliding under

the seat belt in a collision.

Positioning The Lap Belt

5. Position the shoulder belt across the

shoulder and chest with minimal, if any

slack so that it is comfortable and not

resting on your neck. The retractor will

withdraw any slack in the shoulder belt.

6. To release the seat belt, push the red button

on the buckle. The seat belt will automat

ically retract to its stowed position. If

necessary, slide the latch plate down the

webbing to allow the seat belt to retract

fully.

Lap/Shoulder Belt Untwisting Procedure

Use the following procedure to untwist a twisted

lap/shoulder belt.

1. Position the latch plate as close as

possible to the anchor point.

2. At about 6 to 12 inches (15 to 30 cm) above

the latch plate, grab and twist the seat belt

webbing 180 degrees to create a fold that

begins immediately above the latch plate.

3. Slide the latch plate upward over the folded

webbing. The folded webbing must enter

the slot at the top of the latch plate.

4. Continue to slide the latch plate up until it

clears the folded webbing and the seat belt

is no longer twisted.

21_LX_OM_EN_USC_t.book Page 180

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands