Chrysler 300 2021 Owner'S Manual Download Page 203

Page: 203 / 312

SAFETY

201

1. Loosen the adjusters on the lower straps

and on the tether strap of the child seat so

that you can more easily attach the hooks

or connectors to the vehicle anchorages.

2. Place the child seat between the lower

anchorages for that seating position. If the

second row seat can be reclined, you may

recline the seat and/or raise the head

restraint (if adjustable) to get a better fit. If

the rear seat can be moved forward and

rearward in the vehicle, you may wish to

move it to its rear-most position to make

room for the child seat. You may also move

the front seat forward to allow more room

for the child seat.

3. Attach the lower hooks or connectors of the

child restraint to the lower anchorages in

the selected seating position.

4. If the child restraint has a tether strap,

connect it to the top tether anchorage. See

page 204 for directions to attach a tether

anchor.

5. Tighten all of the straps as you push the

child restraint rearward and downward into

the seat. Remove slack in the straps

according to the child restraint

manufacturer’s instructions.

6. Test that the child restraint is installed

tightly by pulling back and forth on the child

seat at the belt path. It should not move

more than 1 inch (25.4 mm) in any

direction.

How To Stow An Unused Switchable-ALR

(ALR) Seat Belt:

When using the LATCH attaching system to

install a child restraint, stow all ALR seat belts

that are not being used by other occupants or

being used to secure child restraints. An unused

belt could injure a child if they play with it and

accidentally lock the seat belt retractor. Before

installing a child restraint using the LATCH

system, buckle the seat belt behind the child

restraint and out of the child’s reach. If the

buckled seat belt interferes with the child

restraint installation, instead of buckling it

behind the child restraint, route the seat belt

through the child restraint belt path and then

buckle it. Do not lock the seat belt. Remind all

children in the vehicle that the seat belts are not

toys and that they should not play with them.

WARNING!



Improper installation of a child restraint to

the LATCH anchorages can lead to failure of

the restraint. The child could be badly

injured or killed. Follow the child restraint

manufacturer’s directions exactly when

installing an infant or child restraint.



Child restraint anchorages are designed to

withstand only those loads imposed by

correctly-fitted child restraints. Under no

circumstances are they to be used for adult

seat belts, harnesses, or for attaching other

items or equipment to the vehicle.

21_LX_OM_EN_USC_t.book Page 201

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands