Chrysler 300 2021 Owner'S Manual Download Page 177

Page: 177 / 312

SAFETY

175



Accumulation of snow or ice around the

wheels or wheel housings.



Using tire chains on the vehicle.



Using wheels/tires not equipped with TPMS

sensors.

Vehicles With Compact Spare

1. The compact spare tire or non-matching

full size does not have a Tire Pressure

Monitoring System sensor. Therefore, the

TPMS will not monitor the pressure in the

compact spare tire.

2. If you install the compact or non-matching

full size spare tire in place of a road tire that

has a pressure below the low-pressure

warning limit, upon the next ignition key

cycle, the TPMS Warning Light will remain

on and a chime will sound. In addition, the

graphic in the instrument cluster will still

display a different color pressure value and

an "Inflate to XX" message.

3. After driving the vehicle for up to

20 minutes above 15 mph (24 km/h), the

TPMS Warning Light will flash on and off for

75 seconds and then remain on solid. In

addition, the instrument cluster will display

a “Service Tire Pressure System” message

for five seconds and then display dashes

(- -) in place of the pressure value.

4. For each subsequent ignition key cycle, a

chime will sound, the TPMS Warning Light

will flash on and off for 75 seconds and then

remain on solid, and the instrument cluster

will display a “Service Tire Pressure System”

message for five seconds and then display

dashes (- -) in place of the pressure value.

5. Once you repair or replace the original road

tire and reinstall it on the vehicle in place of

the compact spare or non-matching full

size, the TPMS will update automatically. In

addition, the TPMS Warning Light will turn

off and the graphic in the instrument cluster

will display a new pressure value instead of

dashes (- -), as long as no tire pressure is

below the low-pressure warning limit in any

of the four active road tires. The vehicle may

need to be driven for up to 20 minutes

above 15 mph (24 km/h) in order for the

TPMS to receive this information.

TPMS Deactivation — If Equipped

The Tire Pressure Monitoring System (TPMS)

can be deactivated if replacing all four wheel

and tire assemblies (road tires) with wheel and

tire assemblies that do not have TPMS Sensors,

such as when installing winter wheel and tire

assemblies on your vehicle.
To deactivate the TPMS, first replace all four

wheel and tire assemblies (road tires) with tires

not equipped with Tire Pressure Monitoring

System (TPMS) sensors. Then, drive the vehicle

for 20 minutes above 15 mph (24 km/h). The

TPMS will chime, the TPMS Warning Light will

flash on and off for 75 seconds and then remain

on. The instrument cluster will display the

“Service Tire Pressure System” message and

then display dashes (--) in place of the pressure

values.
Beginning with the next ignition cycle, the TPMS

will no longer chime or display the “Service Tire

Pressure System” message in the instrument

cluster but dashes (--) will remain in place of the

pressure values.

21_LX_OM_EN_USC_t.book Page 175

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands