Chrysler 300 2021 Owner'S Manual Download Page 173

Page: 173 / 312

SAFETY

171



It is unsafe to test the FCW system. To

prevent such misuse of the system, after four

Active Braking events within an ignition cycle,

the Active Braking portion of FCW will be

deactivated until the next ignition cycle.



The FCW system is intended for on-road use

only. If the vehicle is taken off-road, the FCW

system should be deactivated to prevent

unnecessary warnings due to the surroundings.

Turning FCW On Or Off

NOTE:

The default status of FCW is on; this allows the

system to warn you of a possible collision with

the vehicle in front of you.

The Forward Collision activation/deactivation is

located in "Uconnect Settings" under "Safety

And Driving Assistance". Forward Collision can

be checked or unchecked.
When FCW is selected off, there will be an "FCW

OFF" icon that appears in the instrument cluster

display.
Changing the FCW status to off prevents the

system from warning you of a possible collision

with the vehicle in front of you.

NOTE:

The FCW system’s default state is on. The FCW

system state is kept in memory from one igni

tion cycle to the next. If the system is turned off,

it will remain off when the vehicle is restarted.

Changing FCW And Active Braking Status

The FCW Sensitivity and Active Braking settings

are programmable through the Uconnect

system

page 144.

The default status of FCW is the “Far” setting

and the Active Braking is set to “on”; this allows

the system to warn you of a possible collision

with the vehicle in front of you when you are

farther away and it applies limited braking. This

gives you the most reaction time to avoid a

possible collision.

Changing the FCW status to the “Near” setting,

allows the system to warn you of a possible

collision with the vehicle in front of you when

you are much closer. This setting provides less

reaction time than the “Far” setting, which

allows for a more dynamic driving experience.

NOTE:



The system will retain the last setting

selected by the driver after ignition shut

down.



FCW may not react to irrelevant objects such

as overhead objects, ground reflections,

objects not in the path of the vehicle,

stationary objects that are far away,

oncoming traffic, or leading vehicles with the

same or higher rate of speed.



FCW disables in the same manner as ACC,

and will display a screen indicating that the

feature is unavailable when it has been

disabled.

FCW Limited Warning

If the instrument cluster display reads “ACC/

FCW Limited Functionality” or “ACC/FCW

Limited Functionality Clean Front Windshield”

momentarily, there may be a condition that

WARNING!

Forward Collision Warning (FCW) is not

intended to avoid a collision on its own, nor

can FCW detect every type of potential

collision. The driver has the responsibility to

avoid a collision by controlling the vehicle via

braking and steering. Failure to follow this

warning could lead to serious injury or death.

21_LX_OM_EN_USC_t.book Page 171

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands