Chrysler 300 2021 Owner'S Manual Download Page 105

Page: 105 / 312

STARTING AND OPERATING

103

The following indicators should be used to

ensure that you have properly engaged the

transmission into the PARK position:



Look at the transmission gear position

display and verify that it indicates the PARK

position, and is not blinking.



With the brake pedal released, verify that the

gear selector will not move out of PARK.

REVERSE (R)

This range is for moving the vehicle backward.

Shift into REVERSE only after the vehicle has

come to a complete stop.

NEUTRAL (N)

Use this range when the vehicle is standing for

prolonged periods with the engine running.

Apply the parking brake and shift the

transmission into PARK if you must exit the

vehicle.

DRIVE (D)

This range should be used for most city and

highway driving. It provides the smoothest

upshifts and downshifts, and the best fuel

economy. The transmission automatically

upshifts through all forward gears. The DRIVE

position provides optimum driving characteristics

under all normal operating conditions.
When frequent transmission shifting occurs (such

as when operating the vehicle under heavy loading

conditions, in hilly terrain, traveling into strong

head winds, or while towing a heavy trailer), use

the AutoStick shift control (if equipped) to select a

lower gear

page 104. Under these conditions,

using a lower gear will improve performance and

extend transmission life by reducing excessive

shifting and heat buildup.



Never leave children alone in a vehicle, or

with access to an unlocked vehicle. Allowing

children to be in a vehicle unattended is

dangerous for a number of reasons. A child

or others could be seriously or fatally injured.

Children should be warned not to touch the

parking brake, brake pedal or the transmis

sion gear selector.



Do not leave the key fob in or near the

vehicle (or in a location accessible to chil

dren), and do not leave the ignition in the

ACC or ON/RUN mode. A child could

operate power windows, other controls, or

move the vehicle.

CAUTION!



Before moving the transmission gear

selector out of PARK, you must start the

engine, and also press the brake pedal.

Otherwise, damage to the gear selector

could result.



DO NOT race the engine when shifting from

PARK or NEUTRAL into another gear range,

as this can damage the drivetrain.

WARNING!

(Continued)

WARNING!

Do not coast in NEUTRAL and never turn off the

ignition to coast down a hill. These are unsafe

practices that limit your response to changing

traffic or road conditions. You might lose

control of the vehicle and have a collision.

CAUTION!

Towing the vehicle, coasting, or driving for any

other reason with the transmission in NEUTRAL

can cause severe transmission damage.
For “Recreational Towing”

page 140

For “Towing A Disabled Vehicle”

page 225

21_LX_OM_EN_USC_t.book Page 103

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands