Chrysler 300 2021 Owner'S Manual Download Page 65

Page: 65 / 312

GETTING TO KNOW YOUR VEHICLE

NOTE:

The rear sunshade control switch can be locked

out along with the rear passenger window

controls from the driver switch window lockout

switch.

OWER

UTLETS

Your vehicle is equipped with one 12 Volt (13

Amp) power outlet on the instrument panel and

one 12 Volt (13 Amp) power outlet in the center

console that can be used to power cellular

phones, small electronics and other low

powered electrical accessories. The power

outlets are labeled with either a “key” or a

“battery” symbol to indicate how the outlet is

powered. Power outlets labeled with a “key” are

powered when the ignition switch is in the ACC

or ON/RUN position, while the outlets labeled

with a “battery” are connected directly to the

battery and powered at all times.

NOTE:

All accessories connected to the “battery”

powered outlets should be removed or turned

off when the vehicle is not in use to protect the

battery against discharge.

The front power outlet is located inside the

storage area on the center stack of the

instrument panel.

Front Power Outlet

In addition to the front power outlet, there is

also a power outlet located in the storage area

of the center console.

Center Console Power Outlet

NOTE:

If the Media Hub is in use, do not exceed the

maximum power of 100 Watts (8 Amps) for the

center console power outlet. When the Media

Hub is not in use, the outlet can deliver up to

120 Watts (10 Amps). If the power rating is

exceeded, the fuse protecting the system will

need to be replaced.

WARNING!

Do not place ashes inside the cubby bin

located on the center console on vehicles not

equipped with the ash receiver tray. A fire

leading to bodily injury could result.

21_LX_OM_EN_USC_t.book Page 63

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands