Chrysler 300 2021 Owner'S Manual Download Page 219

Page: 219 / 312

IN CASE OF EMERGENCY

217

Rear Lifting Point

Rear Jacking Location

5. Raise the vehicle just enough to remove the

flat tire and install the spare tire.

6. Remove the lug nuts and tire.

7. Mount the spare tire.

Mounting Spare Tire

NOTE:



For vehicles so equipped, do not attempt to

install a center cap or wheel cover on the

compact spare

page 276.

8. Install the lug nuts with the cone shaped

end of the lug nut toward the wheel. Lightly

tighten the lug nuts.

9. Lower the vehicle to the ground by turning

the jack handle counterclockwise.

10. Finish tightening the wheel bolts. Push

down on the wrench while at the end of the

handle for increased leverage. Tighten the

wheel bolts in a star pattern until each

wheel bolt has been tightened twice. If in

doubt about the correct tightness, have

them checked with a torque wrench by an

authorized dealer or at a service station

page 287.

WARNING!

Raising the vehicle higher than necessary can

make the vehicle less stable. It could slip off

the jack and hurt someone near it. Raise the

vehicle only enough to remove the tire.

CAUTION!

Be sure to mount the spare tire with the valve

stem facing outward. The vehicle could be

damaged if the spare tire is mounted

incorrectly.

WARNING!

To avoid the risk of forcing the vehicle off the

jack, do not tighten the wheel nuts fully until

the vehicle has been lowered. Failure to

follow this warning may result in serious

injury.

21_LX_OM_EN_USC_t.book Page 217

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands