Chrysler 300 2021 Owner'S Manual Download Page 165

Page: 165 / 312

SAFETY

163

(Continued)

NOTE:



For vehicles with multiple partial ESC modes,

the push and release of the button will toggle

the ESC modes. Multiple attempts may be

required to return to "ESC On" mode.



Trailer Sway Control (TSC) is disabled when

the ESC system is in the “Partial Off” mode.



If Equipped — "ESC Sport" and "ESC Track"

are ESC “Partial Off” mode(s).

Full Off – If Equipped
This mode is intended for off-highway or

off-road use only and should not be used on any

public roadways. In this mode, TCS and ESC

features are turned off. To enter the “Full Off”

mode, push and hold the ESC OFF button for

five seconds while the vehicle is stopped with

the engine running. After five seconds, a chime

will sound, the ESC OFF Indicator Light will

illuminate, and the “ESC OFF” message will

display in the instrument cluster. To turn ESC on

again, momentarily push the ESC OFF button.

ESC Activation/Malfunction Indicator Light

And ESC OFF Indicator Light

The ESC Activation/Malfunction

Indicator Light in the instrument

cluster will come on when the ignition

is placed in the ON position. It should

go out with the engine running. If the ESC

Activation/Malfunction Indicator Light comes

on continuously with the engine running, a

malfunction has been detected in the ESC

system. If this light remains on after several

ignition cycles, and the vehicle has been driven

several miles (kilometers) at speeds greater

than 30 mph (48 km/h), see an authorized

dealer as soon as possible to have the problem

diagnosed and corrected.

WARNING!

When in “Partial Off” mode, the TCS

functionality of ESC (except for the limited slip

feature described in the TCS section) has

been disabled and the “ESC Off Indicator

Light” will be illuminated. When in “Partial

Off” mode, the engine power reduction

feature of TCS is disabled, and the enhanced

vehicle stability offered by the ESC system is

reduced.

WARNING!



In the ESC “Full Off” mode, the engine

torque reduction and stability features are

disabled. Therefore, enhanced vehicle

stability offered by the ESC system is

unavailable. In an emergency evasive

maneuver, the ESC system will not engage

to assist in maintaining stability. ESC “Full

Off” mode is intended for off-highway or

off-road use only.



With the ESC switched off, the enhanced

vehicle stability offered by ESC is unavail

able. In an emergency evasive maneuver,

the ESC system will not engage to assist in

maintaining stability. ESC “Full Off” mode is

only intended for off-highway or off-road use.



The Electronic Stability Control (ESC)

cannot prevent the natural laws of physics

from acting on the vehicle, nor can it

increase the traction afforded by prevailing

road conditions. ESC cannot prevent all

accidents, including those resulting from

excessive speed in turns, driving on very

slippery surfaces, or hydroplaning. ESC also

cannot prevent collisions.

WARNING!

(Continued)

21_LX_OM_EN_USC_t.book Page 163

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands