Chrysler 300 2021 Owner'S Manual Download Page 222

Page: 222 / 312

220

IN CASE OF EMERGENCY

3. Connect the negative end (-) of the jumper

cable to the negative (-) post of the booster

battery.

4. Connect the opposite end of the negative (-)

jumper cable to the remote negative (-) post

(exposed metallic/unpainted post of the

discharge vehicle) located directly behind

the under-hood fuse box.

5. Start the engine in the vehicle that has the

booster battery, let the engine idle a few

minutes, and then start the engine in the

vehicle with the discharged battery.

6. Once the engine is started, follow the

disconnection procedure below.

Disconnecting The Jumper Cables

1. Disconnect the negative (-) end of the

jumper cable from the remote negative (-)

post of the discharged vehicle.

2. Disconnect the opposite end of the negative

(-) jumper cable from the negative (-) post of

the booster battery.

3. Disconnect the positive (+) end of the

jumper cable from the positive (+) post of

the booster battery.

4. Disconnect the opposite end of the positive

(+) jumper cable from the remote positive

(+) post of the discharged vehicle.

5. Reinstall the protective cover over the

remote positive (+) post of the discharged

vehicle.

If frequent jump starting is required to start your

vehicle you should have the battery and

charging system tested at an authorized dealer.

WARNING!

Do not connect the jumper cable to the

negative (-) post of the discharged battery.

The resulting electrical spark could cause the

battery to explode and could result in

personal injury.

CAUTION!

Do not run the booster vehicle engine above

2,000 rpm since it provides no charging

benefit, wastes fuel, and can damage booster

vehicle engine.

CAUTION!

Accessories plugged into the vehicle power

outlets draw power from the vehicle’s battery,

even when not in use (i.e., cellular devices,

etc.). Eventually, if plugged in long enough

without engine operation, the vehicle’s

battery will discharge sufficiently to degrade

battery life and/or prevent the engine from

starting.

21_LX_OM_EN_USC_t.book Page 220

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands