Chrysler 300 2021 Owner'S Manual Download Page 88

Page: 88 / 312

GETTING TO KNOW YOUR INSTRUMENT PANEL

Anti-Lock Brake System (ABS) Warning

Light

This warning light monitors the ABS.

The light will turn on when the ignition

is placed in the ON/RUN or ACC/ON/

RUN position and may stay on for as

long as four seconds.
If the ABS light remains on or turns on while

driving, then the Anti-Lock portion of the brake

system is not functioning and service is

required as soon as possible. However, the

conventional brake system will continue to

operate normally, assuming the Brake Warning

Light is not also on.
If the ABS light does not turn on when the

ignition is placed in the ON/RUN or ACC/ON/

RUN position, have the brake system inspected

by an authorized dealer.

Electronic Stability Control (ESC) Active

Warning Light — If Equipped

This warning light will indicate when

the Electronic Stability Control system

is Active. The ESC Indicator Light in

the instrument cluster will come on

when the ignition is placed in the ON/RUN or

ACC/ON/RUN position, and when ESC is

activated. It should go out with the engine

running. If the ESC Indicator Light comes on

continuously with the engine running, a

malfunction has been detected in the ESC

system. If this warning light remains on after

several ignition cycles, and the vehicle has been

driven several miles (kilometers) at speeds

greater than 30 mph (48 km/h), see an

authorized dealer as soon as possible to have

the problem diagnosed and corrected.



The ESC OFF Indicator Light and the ESC Indi

cator Light come on momentarily each time

the ignition is placed in the ON/RUN or ACC/

ON/RUN position.



The ESC system will make buzzing or clicking

sounds when it is active. This is normal; the

sounds will stop when ESC becomes inactive.



This light will come on when the vehicle is in

an ESC event.

Electronic Stability Control (ESC) OFF

Warning Light — If Equipped

This warning light indicates the ESC

is off.

Each time the ignition is turned to ON/RUN or

ACC/ON/RUN, the ESC system will be on, even

if it was turned off previously.

Service LaneSense Warning Light —

If Equipped

This warning light will illuminate when

the LaneSense system is not

operating and requires service.

Please see an authorized dealer.

LaneSense Warning Light — If Equipped

The LaneSense system provides the

driver with visual and steering torque

warnings when the vehicle starts to

drift out of its lane unintentionally

without the use of a turn signal.



When the LaneSense system senses a lane

drift situation, the LaneSense indicator

changes from solid green to solid yellow.



When the LaneSense system senses the lane

has been approached and is in a lane depar

ture situation, the LaneSense indicator

changes from solid white/green to flashing

yellow

page 127.

21_LX_OM_EN_USC_t.book Page 86

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands