Chrysler 300 2021 Owner'S Manual Download Page 162

Page: 162 / 312

160

SAFETY

Anti-Lock Brake System (ABS) Warning

Light

The yellow ABS Warning Light will turn on when

the ignition is placed in the ON/RUN mode and

may stay on for as long as four seconds.
If the ABS Warning Light remains on or comes

on while driving, it indicates that the Anti-Lock

portion of the brake system is not functioning

and that service is required. However, the

conventional brake system will continue to

operate normally if the Anti-Lock Brake Warning

Light is on.
If the ABS Warning Light is on, the brake system

should be serviced as soon as possible to

restore the benefits of Anti-Lock Brakes. If the

Anti-Lock Brake Warning Light does not come

on when the ignition is placed in the ON/RUN

mode, have the light repaired as soon as

possible.

LECTRONIC

RAKE

ONTROL

(EBC)

YSTEM

Your vehicle is equipped with an advanced

Electronic Brake Control (EBC) system. This

system includes Anti-Lock Brake System (ABS),

Brake Assist System (BAS), Electronic Brake

Force Distribution (EBD), Electronic Roll

Mitigation (ERM), Electronic Stability Control

(ESC), Hill Start Assist (HSA), and Traction

Control System (TCS). These systems work

together to enhance both vehicle stability and

control in various driving conditions.
Your vehicle may also be equipped with Rain

Brake Support (RBS), and Ready Alert Braking

(RAB).

Brake System Warning Light

The red Brake System Warning Light will turn on

when the ignition is placed in the ON/RUN

mode and may stay on for as long as four

seconds.
If the Brake System Warning Light remains on or

comes on while driving, it indicates that the

brake system is not functioning properly and

that immediate service is required. If the Brake

System Warning Light does not come on when

the ignition is placed in the ON/RUN mode,

have the light repaired as soon as possible.

Brake Assist System (BAS)

The BAS is designed to optimize the vehicle’s

braking capability during emergency braking

maneuvers. The system detects an emergency

braking situation by sensing the rate and

amount of brake application and then applies

optimum pressure to the brakes. This can help

reduce braking distances. The BAS

complements the Anti-Lock Brake System

(ABS). Applying the brakes very quickly results

in the best BAS assistance. To receive the

benefit of the system, you must apply

continuous braking pressure during the

stopping sequence (do not “pump” the brakes).

Do not reduce brake pedal pressure unless

braking is no longer desired. Once the brake

pedal is released, the BAS is deactivated.

WARNING!

The Brake Assist System (BAS) cannot

prevent the natural laws of physics from

acting on the vehicle, nor can it increase the

traction afforded by prevailing road

conditions. BAS cannot prevent collisions,

including those resulting from excessive

speed in turns, driving on very slippery

surfaces, or hydroplaning. The capabilities of

a BAS-equipped vehicle must never be

exploited in a reckless or dangerous manner,

which could jeopardize the user's safety or

the safety of others.

21_LX_OM_EN_USC_t.book Page 160

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands