Chrysler 300 2021 Owner'S Manual Download Page 171

Page: 171 / 312

SAFETY

169

RCP Detection Zones

RCP monitors the rear detection zones on both

sides of the vehicle, for objects that are moving

toward the side of the vehicle with a minimum

speed of approximately 3 mph (5 km/h), to

objects moving a maximum of approximately

20 mph (32 km/h), such as in parking lot

situations.
When RCP is on and the vehicle is in REVERSE,

the driver is alerted using both the visual and

audible alarms, including reducing the radio

volume.

NOTE:

In a parking lot situation, oncoming vehicles can

be blocked by vehicles parked on either side. If the

sensors are blocked by other structures or vehi

cles, the system will not be able to alert the driver.

Blind Spot Modes

Blind Spot has three selectable modes of

operation that are available in the Uconnect

system.
Blind Spot Alert Lights Only
When operating in Blind Spot Alert mode, the

BSM system will provide a visual alert in the

appropriate side view mirror based on a

detected object. However, when the system is

operating in Rear Cross Path (RCP) mode, the

system will respond with both visual and

audible alerts when a detected object is

present. Whenever an audible alert is

requested, the radio is muted.
Blind Spot Alert Lights/Chime
When operating in Blind Spot Alert Lights/

Chime mode, the BSM system will provide a

visual alert in the appropriate side view mirror

based on a detected object. If the turn signal is

then activated, and it corresponds to an alert

present on that side of the vehicle, an audible

chime will also be sounded. Whenever a turn

signal and detected object are present on the

same side at the same time, both the visual and

audible alerts will be issued. In addition to the

audible alert the radio (if on) will also be muted.

NOTE:

Whenever an audible alert is requested by the

BSM system, the radio is also muted.

When the system is in RCP, the system shall

respond with both visual and audible alerts

when a detected object is present. Whenever

an audible alert is requested, the radio is also

muted. Turn/hazard signal status is ignored;

the RCP state always requests the chime.

WARNING!

Rear Cross Path Detection (RCP) is not a

backup aid system. It is intended to be used

to help a driver detect an oncoming vehicle in

a parking lot situation. Drivers must be

careful when backing up, even when using

RCP. Always check carefully behind your

vehicle, look behind you, and be sure to

check for pedestrians, animals, other

vehicles, obstructions, and blind spots before

backing up. Failure to do so can result in

serious injury or death.

21_LX_OM_EN_USC_t.book Page 169

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands