Chrysler 300 2021 Owner'S Manual Download Page 122

Page: 122 / 312

120

STARTING AND OPERATING

PARKSENSE FRONT AND REAR PARK ASSIST

— IF EQUIPPED

The ParkSense Park Assist system provides

visual and audible indications of the distance

between the rear and/or front fascia/bumper

and a detected obstacle when backing up or

moving forward (e.g. during a parking

maneuver).
For limitations of this system and

recommendations, see

page 125.

ParkSense will retain the system state (enabled

or disabled) from the previous ignition cycle

when the ignition is changed to the ON/RUN

position.

ParkSense can be active only when the gear

selector is in REVERSE or DRIVE. If ParkSense

is enabled at one of these gear selector

positions, the system will remain active until

the vehicle speed is increased to

approximately 7 mph (11 km/h) or above. The

system will become active again if the vehicle

speed is decreased to speeds less than

approximately 6 mph (9 km/h).

ARK

ENSE

ENSORS

The four ParkSense sensors, located in the rear

fascia/bumper, monitor the area behind the

vehicle that is within the sensors’ field of view.

The sensors can detect obstacles from

approximately 12 inches (30 cm) up to

79 inches (200 cm) from the rear fascia/

bumper. These distances depend on the

location, type, and orientation of the obstacle in

the horizontal direction.

The six ParkSense sensors, located in the front

fascia/bumper, monitor the area in front of the

vehicle that is within the sensors’ field of view.

The sensors can detect obstacles from

approximately 12 inches (30 cm) up to

47 inches (120 cm) from the front fascia/

bumper. These distances depend on the

location, type, and orientation of the obstacle in

the horizontal direction.

ARK

ENSE

ISPLAY

The warning display will turn on indicating the

system status when the vehicle is in REVERSE,

or when the vehicle is in DRIVE and an obstacle

has been detected.
The system will indicate a detected obstacle by

showing a single arc in one or more regions

based on the obstacle’s distance and location

relative to the vehicle.

21_LX_OM_EN_USC_t.book Page 120

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands