Chrysler 300 2021 Owner'S Manual Download Page 71

Page: 71 / 312

GETTING TO KNOW YOUR VEHICLE

HOOD

PENING

OOD

To open the hood, two latches must be

released.

1. Pull the release lever located underneath

the driver’s side of the instrument panel.

Hood Release Lever

2. Reach under the hood, move the safety

latch to the left, and lift the hood.

Hood Safety Latch

LOSING

OOD

Hoods equipped with gas props are closed from

the point where the props no longer hold the

hood open.

TRUNK

PENING

RUNK

The trunk may be opened in several ways:



Power trunk release button on the instru

ment panel



Trunk button on the key fob



Trunk Passive Entry button

page 22

With the ignition in the ON/RUN position, the

trunk open symbol will display in the instrument

cluster indicating that the trunk is open. The

odometer display will reappear once the trunk is

closed.

WARNING!

Be sure the hood is fully latched before

driving your vehicle. If the hood is not fully

latched, it could open when the vehicle is in

motion and block your vision. Failure to follow

this warning could result in serious injury or

death.

CAUTION!

To prevent possible damage, do not slam the

hood to close it. Lower hood to approximately

12 inches (30 cm) and drop the hood to

close. Make sure hood is fully closed for both

latches. Never drive vehicle unless hood is

fully closed, with both latches engaged.

21_LX_OM_EN_USC_t.book Page 69

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands