Dual Site with four Switches
Quantum Maestro Getting Started Guide | 167
Step
Instructions
7
Optional: Configure a new Base Site Sync VLAN ID on each Quantum Maestro
Orchestrator.
This step applies if the default Site Sync VLAN IDs 3600 and 3601 conflict with the existing
VLAN IDs in your environment.
For information about the Base Site Sync VLAN ID, see the
Maestro Administration Guide
for your version
> Chapter
Configuring Security Groups
> Section
Configuration
Procedure
> Section
Configuring Security Groups in Gaia Clish
> Section
Configuring the
Base Site Sync VLAN ID in Dual Site Deployment
.
Explanation
The default Site Sync VLAN IDs are:
n
3600 on Orchestrator ID 1_1 and Orchestrator ID 2_1
n
3601 on Orchestrator ID 1_2 and Orchestrator ID 2_2
If you configure a new Base Site Sync VLAN ID, then Quantum Maestro Orchestrators
assign the new Site Sync VLAN IDs in this way:
n
Orchestrator ID 1_1 and Orchestrator ID 2_1 use the Site Sync VLAN ID based on
this formula:
(Base Site Sync VLAN ID you configured) + 0
n
Orchestrator ID 1_2 and Orchestrator ID 2_2 use the Site Sync VLAN ID based on
this formula:
(Base Site Sync VLAN ID you configured) + 1
Example:
If you configure the Base Site Sync VLAN ID 4800 on all Quantum Maestro
Orchestrators, then
n
Orchestrator ID 1_1 and Orchestrator ID 2_1 use the Site Sync VLAN ID 4800
n
Orchestrator ID 1_2 and Orchestrator ID 2_2 use the Site Sync VLAN ID 4801
Procedure
a. Connect to the command line on each Quantum Maestro Orchestrator.
b. Log in to Gaia Clish.
c. Configure the same Base Site Sync VLAN ID on all Quantum Maestro
Orchestrators:
set maestro configuration orchestrator-site-vlan
<
Number
>
d. Restart the
orchd
daemon on each Quantum Maestro Orchestrator.
Log in to the Expert mode and run this command:
orchd restart
Warning - No traffic flows through the Quantum Maestro Orchestrator
until this daemon restarts.
