Canon XF705 Instruction Manual Download

Page: 181 / 231

181

Playing Bac

Photo

Playing Back Photo

You can view the photos you recorded on SD card B.

playing the [Photo

] Index

creen

et the camcorder in

mode (

22).

2 Open the [Photo

] index

creen (

132).

Viewing Photo

1 Move the orange

election frame to the de

ired photo.

2 Pre

the

button to view the photo.

• The photo playback screen appears and the selected photo is

displayed.

• Use the

buttons or push the joystick left/right to

switch to the previous/next photo.

• Press the DISP button to hide/show the onscreen displays.

• Press the

button to return to the [Photos] index screen.

IMPORTANT

• Observe the following precautions while an access indicator is

illuminated in red. Failure to do so may result in permanent data
loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card slot cover of the card being accessed and do not remove the card.

NOTES

• The following photos may not be displayed correctly.

- Photos not recorded with this camcorder.
- Photos created or edited on a computer.
- Photos whose file names have been changed.

Operating modes:

Summary of Contents for XF705








































































































































































































































Search results

Summary of Contents for XF705

Reviews:

Related manuals for XF705

Brands by name

Popular brands

Canon XF705, Instruction Manual

Search results

Summary of Contents for XF705

Reviews:

Related manuals for XF705

Brands by name

Popular brands