Canon XF705, Instruction Manual

Page: 77 / 231

77
Adju s ting the Focu s
Pu s h A F
Pre ss and hold the PU S H AF button.
The camcorder will focus automatically using the highest AF
speed and AF response as long as you hold the PUSH AF
button pressed down.
NOTES NOTES
• The focus will be locked in the following cases.
- When
>
[
v $
Camera Setup]
>
[Face AF] is
set to [Face Only] and no face is detected.
- When
>
[
v #
Camera Setup]
>
[AF Mode] is
set to [AF-Boosted MF] and the focus is the manual
adjustment range.
• When the AF mode cannot be selected (
A
78), Push AF (autofocus at the highest speed) is not available
either.
A F-Boo s ted MF
In this focus mode, you can focus manually most of the way
and let the camcorder finish focusing automatically. This is very
convenient when you want to make certain that your 4K
recordings are in sharp focus.
Additionally, with this mode, if the camcorder cannot evaluate
how to adjust the focus, it will not perform unreliable focus
adjustments. This results in an overall more stable focusing
operation than with continuous AF.
1 S et the FOCU S s witch to A.
•
@
appears on the left of the screen.
2 S et [AF Frame] to a s etting other than [Automatic]
( s tep s 1-2,
A
79).
3 S elect [AF Mode].
>
[
v #
Camera Setup]
>
[AF Mode]
4 S elect [AF-Boo s ted MF] and then pre ss S ET.
• When the focus is in the manual adjustment range, the focus frame will appear in yellow.
5 If nece ss ary, change the s ize and po s ition of the AF frame (
A
79).
6 Turn the focu s ring to adju s t the focu s .
• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment
range, the focus frame will turn white and the camcorder will then finish focusing automatically.
• While the focus stays within the automatic adjustment range, the camcorder will keep the subject in focus
automatically.