Canon XF705, Instruction Manual

Page: 114 / 231

S pecial Recording Mode s
114
4 Pre ss the REC button again to s top recording.
• The clip is recorded at the selected frame rate.
• The tally lamps go out and [SLOW STBY] appears at the top of the screen.
5 When you have fini s hed recording, turn off the s pecial recording mode.
• Repeat steps 1 and 2 selecting [Normal Recording] instead.
NOTES NOTES
• Slow motion recording cannot be used together with pre-recording.
• When slow motion recording is activated, the [PQ] and [HLG] options in the custom picture file ([Gamma] and
[Preset]) and their corresponding LUTs will not be available.
• The shooting frame rate cannot be changed while recording.
• The time code signal will not be output from the SDI terminal, HDMI OUT terminal or TIME CODE terminal.
• If the video format or system frequency is changed, slow motion recording will be canceled and the shooting
frame rate will be reset to its default value.
• About the time code when slow motion recording is activated:
- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode.
- If the time code running mode was set to [Free Run], the time code running mode will be changed
automatically to [Rec Run] when slow motion recording is activated.
- When the special recording mode is turned off, the time code running mode will return to its previous setting.
Pre-recording
When pre-recording is activated, the camcorder starts recording continuously into a temporary memory (approx.
3 seconds) so when you press the REC button, the clip will contain also a few seconds of video and audio
recorded before you pressed the button.
1 S elect [Recording Mode].
>
[
Æ !
Recording/Media Setup]
>
[Recording Mode]
2 S elect [Pre-Recording] and then pre ss S ET.
• [PRE REC STBY] appears at the top of the screen.
3 Pre ss the REC button to begin recording.
• The tally lamps illuminate.
• [PRE REC STBY] changes to [
Ü
PRE REC] while recording.
4 Pre ss the REC button again to s top recording.
• The clip is recorded. The recorded clip will include a few seconds of video and audio recorded before the
REC button was pressed.
• The tally lamps go out and [PRE REC STBY] appears at the top of the screen.
5 When you have fini s hed recording, turn off the s pecial recording mode.
• Repeat steps 1 and 2 selecting [Normal Recording] instead.
NOTES NOTES
• Pre-recording cannot be used together with slow motion recording.
• If the video format or system frequency is changed, pre-recording will be canceled.