Canon XF705, Instruction Manual

Page: 101 / 231

101
Recording Audio
NOTES NOTES
• We recommend using headphones when adjusting the audio level. If the input level is too high, audio may
become distorted even if the audio level indicator shows an appropriate level.
• If you set an assignable button to [Audio Level Indicator] (
A
117), you can press the button to turn the
onscreen audio level indicator on and off.
A dvanced A udio Input S etting s
Low-Cut Filter (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (
A
95), you can activate the built-in
microphone's low-cut filter.
1 Select [Built-in Mic Low Cut].
>
[
¡ #
Audio Setup]
>
[Built-in Mic Low Cut]
2 Select the desired option and then press SET.
Option s
[Off]: For recording audio under usual conditions.
[LC1]: For recording mainly people’s voices.
[LC2]: For reducing the background sound of wind when recording outdoors in windy surroundings (for
example, on a beach or close to buildings). Note that when you use this setting some low-
frequency sounds may be suppressed along with the sound of wind.
Microphone Sensitivity (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (
A
95), you can adjust select the built-in
microphone's sensitivity.
1 Select [Built-in Mic Sensitivity].
>
[
¡ #
Audio Setup]
>
[Built-in Mic Sensitivity]
2 Select the desired option and then press SET.
Option s
[Normal]: For recording audio under usual conditions.
[High]: For recording audio at a higher volume (+6 dB).
Microphone Attenuator (Built-in Microphone)
If you selected [Built-in Mic] as the audio input for an audio channel (
A
95), you can activate the built-in
microphone's attenuator (12 dB).
1 Select [Built-in Mic Att.].
>
[
¡ #
Audio Setup]
>
[Built-in Mic Att.]
2 Select [On] and then press SET.
Operating modes: