Canon XF705, Instruction Manual

Page: 21 / 231

21
Preparing the Power S upply
Removing the Battery Pack
1 Set the
Q
switch to OFF.
2 Holding down the BATTERY RELEASE button, slide the
battery pack up and then pull it out.
Checking the Remaining Battery Charge
When the camcorder is turned on, you can check the approximate remaining battery usage time (in minutes) by
looking at any recording/playback screen or the [Battery/Hour Meter] status screen (
A
201). You can also
check the approximate charge level on the battery pack itself.
Press the CHECK button on the battery pack. An
indicator will light for approximately 3 seconds and show
the approximate remaining battery charge.
0-25%
26-50%
51-75%
76-100%
U s ing a Power Outlet
You can also power the camcorder directly from a power outlet using the supplied CA-CP200 L Compact Power
Adapter. While the camcorder is powered using a power outlet, you can replace the battery pack even when the
camcorder is turned on.
1 Connect the power cord to the compact power adapter
and plug it into a power outlet.
2 Connect the compact power adapter’ s DC plug to the
DC IN terminal on the camcorder.
IMPORTANT
• Make sure to turn off the camcorder before connecting or
disconnecting the compact power adapter.
• When using the compact power adapter, do not fix it
permanently to one place as this may cause a malfunction.
CHECK button Battery charge
indicator
햲
햳
DC IN
terminal
Compact power adapter