Recording Audio
102
Microphone Sensitivity (INPUT Terminals)
If you selected [INPUT Terminals] as the audio input for an audio channel (
A
95), one of the INPUT switches is
set to ANALOG, and the corresponding ANALOG switch is set to MIC or MIC+48V, you can select the external
microphone’s sensitivity.
1 Select the menu setting for the INPUT terminal used.
>
[
¡ $
Audio Setup]
>
[INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
2 Select the desired level and then press SET.
• You can select one of 5 sensitivity levels from –12 dB to +12 dB.
Microphone Attenuator (INPUT Terminals)
If you selected [INPUT Terminals] as the audio input for an audio channel (
A
95), one of the INPUT switches is
set to ANALOG, and the corresponding ANALOG switch is set to MIC or MIC+48V, you can activate the external
microphone’s attenuator (20 dB).
1 Select the menu setting for the INPUT terminal used.
>
[
¡ $
Audio Setup]
>
[INPUT 1 Mic Att.] or [INPUT 2 Mic Att.]
2 Select [On] and then press SET.
Microphone Attenuator (MIC Terminal)
If you selected [MIC Terminal] as the audio input for an audio channel (
A
95), you can activate the external
microphone's attenuator (20 dB).
1 Select [MIC Att.].
>
[
¡ $
Audio Setup]
>
[MIC Att.]
2 Select [On] and then press SET.
Low-Cut Filter (MIC Terminal)
If you selected [MIC Terminal] as the audio input for an audio channel (
A
95), you can activate the external
microphone's low-cut filter.
1 Select [MIC Low Cut].
>
[
¡ $
Audio Setup]
>
[MIC Low Cut]
2 Select [On] and then press SET.
• When you activate the low-cut filter, some low-frequency sounds may be suppressed along with the sound
of wind.
Summary of Contents for XF705
