Canon S800 Reference Manual Download Page 92

Page: 92 / 214

Chapter 6 Troubleshooting

Contents

Index

Deep cleaning the print head (cont.)

3 Read the message and click the OK button.

• Print head deep cleaning begins and the POWER/

ERROR lamp blinks green. Always wait for the lamp
to stop blinking (deep cleaning requires about 1
minute).

4 Read the next message and click the OK button.

5 Print a nozzle check pattern and check the patterns to

determine if deep cleaning improved the performance
of the print head.

6 If the nozzle check pattern is still not crisp and clear

after deep cleaning, the Printhead may be damaged
and worn out. Call for service to fix the problem.

• Printing a nozzle check pattern

Reference

Summary of Contents for S800























































































































































































































Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands

Canon S800, Reference Manual

Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands