manualshive.com logo in svg

Canon S800, Reference Manual

The Canon S800 Reference Manual is a comprehensive user guide for the Canon S800 printer, providing detailed instructions on setup, operation, and troubleshooting. This manual is available for free download from manualshive.com, ensuring users have easy access to the information they need to maximize their printing experience.

Share
Download
background image

Chapter 6 Troubleshooting

Contents

Index

196

Transporting the printer

Use the original box and protective material to pack the printer for transport before 
moving or shipping the printer for servicing.

1 Open the front cover and remove the Printhead.

• Place the Printhead in a plastic bag then tie or seal 

the bag.

• If the optional Scanner Cartridge is installed, 

remove it and place it in the storage container.

2 Close the front cover, push down the paper rest, and 

push in the paper output tray.

3 Press the POWER button to switch the printer off. 

After the POWER/ERROR lamp goes off, unplug the 
printer.

• To prevent a printer malfunction, never 

unplug the printer while the POWER/
ERROR lamp is lit or blinking.

4 Disconnect the printer or USB cable from the rear of 

the printer and the computer.

5 Close the front cover and attach the tape to fasten the 

front cover and the paper output tray.

6 Hold the printer on both ends with the protective 

material as you place it in the box.

• Mark the box “FRAGILE” or “HANDLE WITH 

CARE”.

Cautions

Memo

Summary of Contents for S800























































































































































































































Reviews:

No comments

Related manuals for S800

TallyGenicom 2440 Quick Start Manual preview
2440
Brand: TallyGenicom Pages: 38
Xerox Phaser 7800 Installation Manual preview
Phaser 7800
Brand: Xerox Pages: 2
Xerox Phaser 3600 Voluntary Product Accessibility Template preview
Phaser 3600
Brand: Xerox Pages: 11
Xerox CiPress 325 Customer Help Information preview
CiPress 325
Brand: Xerox Pages: 192
Xerox Phaser 6100 Instructions Manual preview
Phaser 6100
Brand: Xerox Pages: 10
Xerox DocuPrint N24 Function Manual preview
DocuPrint N24
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7425 Quick Use Manual preview
WORKCENTRE 7425
Brand: Xerox Pages: 88
Xerox PHASER 8560MFP Supplementary Manual preview
PHASER 8560MFP
Brand: Xerox Pages: 10
Xerox ColorQube 9203 Quick Manual preview
ColorQube 9203
Brand: Xerox Pages: 33
Xerox C123 Copycentre Quick Reference Manual preview
C123 Copycentre
Brand: Xerox Pages: 154
Xerox WorkCentre 5845 Installation And Operation Manual preview
WorkCentre 5845
Brand: Xerox Pages: 14
Xerox WorkCentre 7132 Supplementary Manual preview
WorkCentre 7132
Brand: Xerox Pages: 3
Lanier LD225 Function Manual preview
LD225
Brand: Lanier Pages: 138
Lanier LD225 Fax Manual preview
LD225
Brand: Lanier Pages: 236
Canon MP280 Getting Started Manual preview
MP280
Brand: Canon Pages: 31
Mooreco Makerspace 91413 Assembly Instructions Manual preview
Makerspace 91413
Brand: Mooreco Pages: 10
A&D AD-8120 Instruction Manual preview
AD-8120
Brand: A&D Pages: 32
AstroJet IB-9000-6P Operator'S Manual preview
IB-9000-6P
Brand: AstroJet Pages: 32

Brands by name

Popular brands

Load more brands