Canon S800 Reference Manual Download Page 20 | Manualshive

Page: 20 / 214

background image

20

Chapter 2 Getting Acquainted with the Printer

Opening the printer driver

You can open the printer driver to change settings before
each print job, or you can open the printer directly from
the Windows desktop to perform maintenance.

<Printer Properties dialog box>

●

Opening the printer driver from a software
application

Open the printer driver from the software application
where you created to the file so you can perform
special settings for the print job before you start it.
After you execute the print job, the settings you
selected are cancelled and the default printer driver
settings are restored.

●

Opening the printer driver directly

Open the print driver directly from the desktop to
perform routine maintenance tasks, or perform
system settings for the printer (port selection,
spooling, etc.)

• After you open the printer driver from a

software application, if you see some printer
driver options are greyed out and
unavailable (Page Size, Orientation, etc.)
then open the printer driver directly.

Memo

There are two ways to open the printer driver.

«
...
18
19
20
21
22
...
»

Summary of Contents for S800























































































































































































































Reviews:

No comments

Related manuals for S800

Brand: Zeka Pages: 54

IMAGERUNNER ADVANCE C5051

Brand: Canon Pages: 72

iPF710 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 92

iPF8000S - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 8

imageRUNNER ADVANCE C9075S PRO

Brand: Canon Pages: 48

Two-Knife Booklet Trimmer-A1

Brand: Canon Pages: 32

Perfect Binder-C1

Brand: Oce Pages: 82

IMAGERUNNER 7095 PRINTER

Brand: Canon Pages: 615

imageRUNNER C3125i

Brand: Canon Pages: 816

Brand: Canon Pages: 300

Brand: Canon Pages: 288

Brand: MAKER MADE Pages: 21

Brand: Canon Pages: 58

Brand: Canon Pages: 30

Brand: Oki Pages: 268

Brand: Oki Pages: 54

Brand: Oki Pages: 54

Brand: Oki Pages: 202

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands