Canon S800 Reference Manual Download Page 44

Page: 44 / 214

Contents

Index

Chapter 4 Using the Printer Driver

Basic printer settings (cont.)

4 Look at the illustration to confirm the paper feed

method, and paper thickness lever setting.

5 Click the OK button to close the Printer Properties

dialog box.

• The Halftoning settings may be locked or

disabled for some print mode settings on the
Print Quality slide bar. For details, click the
Help button.

• Any settings that you change for the

current print job are restored to their
print mode default settings after the
software application is closed.

Memo

Click the Advanced button if you want to check
the settings.

• To change the method of the paper feed,

change the Paper Feed setting.

• To adjust the quality of the printing, drag

the Print Quality slide bar left or right.

Summary of Contents for S800























































































































































































































Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands

Canon S800, Reference Manual

Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands