Canon S800 Reference Manual Download Page 171

Page: 171 / 214

Chapter 6 Troubleshooting

Contents

Index

171

Paper jams in printer (cont.)

●

Paper jams during manual feed

1 Slowly pull the jammed paper out of the paper output

tray or manual feed slot, whichever is easier.

• If the paper tears when you remove it, press

the POWER button to switch the printer off
and open the front cover. If you see paper
scraps inside the printer, remove them.

• If you had to switch the printer off to remove

the paper, the stream of data from the printer
for the print job has been lost, and you will
have to re-start the print job.

• Printing high density images on small size

plain paper (A5, etc.) and smaller will cause
excessive curl in the printed sheets.

2 Insert another sheet in the manual feed slot, and

press the RESUME button.

Memo

Summary of Contents for S800























































































































































































































Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands

Canon S800, Reference Manual

Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands