69
Chapter 5 Using Special Print Media
Printing on transparencies (OHP film) (cont.)
4 Fan the transparencies to remove static cling and tap
them against the flat surface to align the edges.
5 Set one sheet of plain paper behind the stack.
6 Align the stack with the right side of the sheet feeder,
and insert it into the printer. Slide the paper guide to
the stack so it is snug (not too tight).
• Always handle transparencies by the edges
to avoid touching the print surface with your
bare fingers.
• To avoid jams and multiple feeds, if the
transparencies are curved, load them with
the curved side up.
• You can load up to 10 transparencies in
the sheet feeder.
Cautions
Memo
Plain paper
OHP film