Canon LBP351 Series User Manual Download Page 637

Page: 637 / 642

◼

WEEE Directive / Rule

Only for European Union and EEA (Norway, Iceland and Liechtenstein)

These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE

Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.

If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this

indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a

concentration above an applicable threshold specified in the Battery Directive.

This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when

you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic

equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible

impact on the environment and human health due to potentially hazardous substances that are generally associated

with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources.

For more information about the recycling of this product, please contact your local city office, waste authority,

approved scheme or your household waste disposal service or visit www.canon-europe.com/weee , or www.canon-

europe.com/battery .

India only

This product is not to be disposed of with your household waste, according to the e-waste (Management and

Handling) Rules, 2011. This product should be handed over to a designated collection point, e.g., to an

authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of

this type of waste could have a possible negative impact on the environment and human health due to

potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in

the correct disposal of this product will contribute to the effective usage of natural resources. For more

information regarding return and recycling of WEEE products, please visit http://www.canon.co.in/

environment .

Also, this product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 % by

weight and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule II of the Rule.

◼

IPv6 Ready Logo

The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-2

established by the IPv6 Forum.

Appendix

630

Summary of Contents for LBP351 Series



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands

Canon LBP351 Series, User Manual

Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands