Canon LBP351 Series User Manual Download Page 351

Page: 351 / 642

[Report]

The history of up to 16 documents printed as setting lists and reports is displayed (up
to 128 documents when the SD card is installed).

[E-Mail Print]

The history of up to 16 e-mails printed after received is displayed (up to 128
documents when the SD card is installed).

[Job Log] (E-Mail RX)

The e-mail reception history shows up to 96 e-mails. If an error occurs during e-mail reception, the applicable

error code is displayed in [RX Results].

Error Code

Cause

Action

407

The POP3 mail server was

disconnected.

●

Consult your network administrator.

●

If the error occurs frequently with the same e-mail
data, check whether the e-mail data is normal.

Data of 1 KB (1024 bytes) could

not be received within 10

minutes during e-mail reception.

408

The "ERR" response was

returned from the POP3 mail

server.

Consult your network administrator.

412

Data of 1 KB (1024 bytes) could

not be received within 10

minutes during e-mail reception.

●

Consult your network administrator.

●

If the error occurs frequently with the same e-mail
data, check whether the e-mail data is normal.

420

The e-mail data size exceeds 1.5

GB.

If the SD card is installed on the machine, the data size of

an e-mail to send must be 1.5 GB or less.

421

The e-mail message size exceeds

25 MB.

If the SD card is installed on the machine, the message

size of an e-mail to send must be 25 MB or less.

422

The size of an attached file

exceeds 100 MB.

If the SD card is installed on the machine, the size of each

attached file must be 100 MB or less.

423

A received attached file is in an

unsupported format.

Attached files must be in JPEG or TIFF format. Do not

attach any files of other formats to an e-mail to send.

424

More than three files are

attached.

Excessive attached files are not printed.

430

The sender of the received e-

mail is unknown.

Make sure to set a sender before sending e-mails.

431

A divided e-mail has been

received.

Take the following action to prevent e-mails from being

sent as a divided e-mail.

●

Reduce the size of an e-mail to send. (Reduce the e-
mail size to be less than the one that causes a divided
e-mail.)

●

Configure the application to prevent e-mails from
being divided before sending.

The received e-mail contains

unsupported encoding or

character codes.

For e-mails to send, use the encoding and character codes

supported by the machine. Outline of E-Mail

Print(P. 157)

The received e-mail is in an

unsupported format.

Check the e-mail format. We recommend sending e-mails

in text format.

432

The received data is invalid.

Check whether the data of the sent e-mail is normal.

Using Remote UI

344

Summary of Contents for LBP351 Series



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands

Canon LBP351 Series, User Manual

Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands