Canon IMAGERUNNER 2530, Service Manual

Page: 176 / 336

7
7
7-6
7-6
Error Code > Error Code > Error Code Details
Error Code > Error Code > Error Code Details
Ecode Detail
Code
Item Description
E505 0001 Title EEPROM error
Description The checksum for the EEPROM data has an error.
Remedy 1.Replace the Finisher Controller PCB (PCB1).
E520 0001 Title Shift Motor (M4) error
Description The shift roller does not leave the shift roller home position
when the Shift Motor (M4) has been driven for 1.2 seconds.
Remedy 1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
E520 0002 Title Shift Motor (M4) error
Description The shift roller does not return to the shift roller home position
when the Shift Motor (M4) has been driven for 1.2 seconds.
Remedy 1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
E531 8001 Title Stapler Motor (M10) error
Description The stapler does not leave the staple home position when the
Staple Motor (M10) has been driven for 0.5 sec.
Remedy 1.Check the wiring between the Finisher Controller PCB and
Stapler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
E531 8002 Title Stapler Motor (M10) error
Description The stapler does not return to the staple home position when
the Stapler Motor (M10) has been driven for 0.5 sec.
Remedy 1.Check the wiring between the Finisher Controller PCB and
Stapler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
E532 0001 Title STP Move Motor (M1) error
Description The stapler does not leave the stapler move home position
when the STP Move Motor (M1) has been driven for 0.25 sec.
Remedy 1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and
the STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
Ecode Detail
Code
Item Description
E532 0002 Title STP Move Motor (M1) error
Description The stapler does not return to the stapler move home position
when the STP Move Motor (M1) has been driven for 2.8 sec.
Remedy 1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and
the STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
E540 0001 Title Tray Lift Motor (M11) time out error
Description The stack tray does not move within a specified time period.
Remedy 1.Replace the Tray Lift Motor (M11).
2.Replace the Finisher Controller PCB (PCB1).
E540 0005 Title Tray Lift Motor (M11) closing detect switch error
Description The FG input cannot be detected when the Tray Lift Motor
(M11) has been driven for 0.1 second.
Remedy 1.Replace the Stack Tray Clock Sensor (S13).
2.Replace the Tray Lift Motor (M11).
3.Replace the Finisher Controller PCB (PCB1).
E542 0001 Title Additional Tray Lift Motor (M12) time out error
Description The stack tray does not move within a specified time period.
Remedy 1.Replace the Additional Tray Lift Motor (M12).
2.Replace the Finisher Controller PCB (PCB1).
E542 0005 Title Additional Tray Lift Motor (M12) closing detect switch error
Description The FG input cannot be detected when the Additional Tray
Lift Motor (M12) has been driven for 0.1 second.
Remedy 1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12).
3.Replace the Finisher Controller PCB (PCB1).
E567 0001 Title Shift Roller Release Motor (M5) error
Description The shift roller does not leave the shift roller release home
position when the Shift Roller Release Motor (M5) has been
driven for 0.1 sec.
Remedy 1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
E567 0002 Title Shift Roller Release Motor (M5) error
Description The shift roller does not return to the shift roller release home
position when the Shift Roller Release Motor (M5) has been
driven for 0.06 sec.
Remedy 1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).