Canon IMAGERUNNER 2530, Service Manual

Page: 215 / 336

8
8
8-30
8-30
Service Mode > Details of Service Mode > #PRINT > List of Functions(PRINT CST)
Service Mode > Details of Service Mode > #PRINT > List of Functions(PRINT CST)
<165: Fixing auto cleaning frequency setting>
Use this parameter to increase the fixing auto cleaning frequency. Incrementing the value
increases the fixing auto cleaning frequency.
0: Not cleaned.
1: Cleaning control temperature: 225˚C, Cleaning time: 60 sec, Cleaning interval: 500 sheets
2: Cleaning control temperature: 225˚C, Cleaning time: 60 sec, Cleaning interval: 200 sheets
3: Cleaning control temperature: 225˚C, Cleaning time: 60 sec, Cleaning interval: 100 sheets
<166: Temperature adjustment UP/DOWN mode (Plain paper, manual
feed tray)>
The temperature adjustment offset relative to the target fixing temperature of plain paper fed
from the manual feed paper can be changed in steps of 3˚C. Use this parameter when the
fixing performance is low or when it is necessary to prevent the paper from slipping or being
curled.
Plain paper: Plain paper mode, thin paper mode, S thin paper mode, OHP mode
0 - 2:+15˚C
3 - 11:12 - -15˚C (in steps of 3˚C)
12 - 14:-15˚C
<173: Temperature adjustment UP/DOWN mode (2nd page of
double-sided printing)>
The temperature adjustment offset relative to the target fixing temperature of the second page
of double-sided printing can be changed in steps of 3˚C. Use this parameter when the fixing
performance is low or when it is necessary to prevent the paper from slipping or being curled.
Plain paper: Plain paper mode, thin paper mode, S thin paper mode, OHP mode
0 - 2:+15˚C
3 - 11:12 to -15˚C (in steps of 3˚C)
12 - 14: -15˚C
<174: Reduction in FCOT>
Set the pickup permission temperature (temperature adjustment for the fist page of printing)
to -40˚C before fixing.
Use this parameter to reduce the FCOT.
0:OFF
1:ON
●
●
●
●
<179: Temperature adjustment UP/DOWN mode (Envelop/Postcard)>
The temperature adjustment offset relative to the target fixing temperature of the envelope/
postcard can be changed in steps of 3˚C. Use this parameter when the fixing performance is
low or when it is necessary to prevent the paper from slipping or being curled.
Envelop/postcard: Postcard mode, S postcard mode, Envelop mode
0 - 2:+15˚C
3 - 11:+12 to -15˚C (in steps of 3˚C)
12 - 14:-15˚C
<180: Temperature adjustment UP/DOWN mode (Special mode N)>
The temperature adjustment offset relative to the target temperature of fixing in special mode
N can be changed in steps of 3˚C. Use this parameter when the fixing performance is low or
when it is necessary to prevent the paper from slipping or being curled.
0 - 2:+15˚C
3 - 11:12 to -15˚C (in steps of 3˚C)
12 - 14:-15˚C
List of Functions(PRINT CST)
<#CST> CAS1> CAS1-U1>,<#CST> CAS2> CAS1-U1>,<#CST>
CAS3> CAS1-U1>,<#CST> CAS4> CAS1-U1>
Setting of paper name used for paper size group 'U1'
When setting the following special size paper for U1, U2, U3, and U4 which are specified for
the paper name to be used in paper size group, it becomes possible to treat the paper size in
U1, U2, U3, and U4 as special size paper in universal size cassettes.
Settings 26: OFI, 27: E-OFI, 37: M-OFI, 36: A-OFI, 24: FLSP, 25: A-FLSP, 30: A-LTRR, 42:
FA4, 34: G-LGL 0: default
<#CST> CAS1> CAS1-U2>,<#CST> CAS2> CAS1-U2>,<#CST>
CAS3> CAS1-U2>,<#CST> CAS4> CAS1-U2>
Setting of paper name used for paper size group 'U2'
When setting the following special size paper for U1, U2, U3, and U4 which are specified for
the paper name to be used in paper size group, it becomes possible to treat the paper size in
U1, U2, U3, and U4 as special size paper in universal size cassettes.
Settings 32: G-LTR-R, 34: G-LGL, 23: K-LGL-R, 0: default
●
●
■
●
●