Canon IMAGERUNNER 2530, Service Manual

Page: 71 / 336

2
2
2-43
2-43
Technology > Fixing System > Overview > Specifications
Technology > Fixing System > Overview > Specifications
Fixing System
Overview
Features
This machine introduces the on-demand fixing method.
Fixing inlet guide Pressure roller
Fixing delivery roller
Fixing heater
Separation guide
Fixing film
Cleaning roller
■
F-2-68 F-2-68
Specifications
Item Function/method
Fixing method
On-demand fixing
Fixing speed
139mm/sec (1/1-high speed: 0.8% speed-up)
137mm/sec (1/1-speed)
133mm/sec (1/1-slow speed: 3.1% speed-down)
Fixing heater Ceramic heater
Control temperature 208 deg C (plain paper) *1
Temperature detection
By the main thermistor and the sub thermistor
Cleaning mechanism Cleaning roller
Edge heat rising prevention
control
Down sequence control
Fixing loop control
Loop sensor
Protective Function Main thermistor and Sub thermistor
Thermo Switch (operating temperature: 250 deg C)
*1. Target temperature is specified depending on the fixing mode and the fixing temperature
at the start of warm-up control.
■
T-2-23 T-2-23