California Instruments FCS Series II, User Manual

Page: 52 / 210

User Manual – Rev B FCS Series II
4.1.6 Cu rsor Keys
T s can be use
CURSOR UP ( S ) to
le cursor position. If the present cursor
position is at the top of the right hand column, the cursor is
lumn, the cursor is
moved to the bottom of the right hand column.
C
f the present
, the
olumn. If
cursor is at the bottom of the right hand column, the
4.1.7 Output on/off Key
he cursor key d to scroll through a list of menu entries.:
The UP key moves the cursor position upwards one position
the previous availab
moved to the bottom position of the left hand column. If the
present cursor is at the top of the left hand co
URSOR DOWN (
T
) The DOWN key moves the cursor position downwards one
position to the next available cursor position. I
cursor position is at the bottom of the left hand column
cursor is moved to the top position of the right hand c
the present
cursor is moved to the top of the left hand column.
T locate of
th active
output relays are open (LED
convenient way to disconnec
4.1.8 Ph
he
Output on/off
key
e output relays. The
d to the left of the Menu keys may be used to control the state
state is indicated by the LED directly above the on/off key. If the
is off), the output is floating. The ON/OFF button provides a
t the load without having to remove any wires.
ase Key
The
Phase
key may be used the
Phase
button repeatedly will cycle through phase A, B, C and ALL PHASES.
If all three phase selection LED's are lit, a
vo
rrent limit setti
Note that in single-phase mode, the ØA LED is always lit and the Phase button is inactive.
to select the desired output phase. (ØA, ØB, ØC). Pressing
ll three phases are selected and changes made to
ngs will apply to all three phases. ltage and cu
California Instruments 52