User Manual – Rev B
FCS Series II
Parameter
Specification
Vibration:
Designed to meet NSTA project 1A transportation levels using CI
provided packing crate.
Shock:
Designed to meet NSTA project 1A transportation levels using CI
provided packing crate.
2.4 Front Panel Controls
Controls:
Shuttle knob:
Shuttle knob may be used to adjust voltage, current limit and frequency
for selected phase or all three phases while in the SET menu. In all other
menu's, the shuttle may be used to change parameter values and
settings.
Numeric Keypad
Keys 0 through 9, decimal point, and +/- sign key may be used to enter
any numeric data value.
Up/down arrow keys:
A set of up and down arrow keys is used to move the cursor position in
all menus. This allows quick selection of the desired function or
parameter.
Function keys:
Set
key will show output voltage and frequency setting.
Meas
key displays the measurement screens. Measure key will display
measurement values for selected phase or phase A if all three phases
are selected.
Menu
key selects main menu.
Enter
key is used to confirm selections.
Back
key is used to back up to previous screen.
Output on/off
key for output relay control.
Phase
key toggles between phase A, B, C or all phases selection.
Displays:
LCD graphics display:
Large high contrast backlit LCD display. An adjustable viewing angle
makes it easy to read from all practical locations.
Status indicators:
Large and bright status indicators inform the user of important power
source conditions.
The Remote lamp informs the user that the unit is under remote control.
The Overload lamp indicates that excessive current is being drawn at the
output.
The Over temperature lamp illuminates when internal heat sink
temperatures are too high.
The Hi Range indicator is lit any time the unit is switched to the high
voltage range.
The Output On/Off indicator is on when the power source output relays
are closed.
The Phase A, B and C indicators are lit when the relevant phase is
selected with the Phase key.
California Instruments
19
Summary of Contents for FCS Series II
Page 4: ...User Manual Rev B FCS Series II California Instruments 4...
Page 27: ...User Manual Rev B FCS Series II California Instruments 27...
Page 89: ...FCS Series II 89 Figure 5 1 FCS System Block Diagram User Manual Rev B California Instruments...
Page 95: ...User Manual Rev B FCS Series II Figure 6 1 Calibration Setup California Instruments 95...