User Manual – Rev B
FCS Series II
12. Option –ABD: Airbus ABD0100.1.8 Test (Software)
U
/N CIC496 CD ROM
t
Software Test user manual (CI P/N 4994-971) for operating instructions for
all GUI based test options. This manual is distributed in PFD format on the same CD as this user
m
I
se of this option requires the following:
•
FCS Series II AC power source.
•
-ABD option. Options installed are listed on unit’s serial tag.
•
Windows XP/2000 PC with RS232C, USB or National Instruments GPIB controller
interface. California Instruments recommends the use of the GPIB interface for best
performance.
•
LxGui Windows software revision 1.17 or higher. Provided on CI P
or available for download from California Instruments’ website.
•
Additional equipment will be required in order to meet all ABD directive tes
requirements.
Refer to the Avionics
anual. (C P/N CIC496).
California Instruments
199
Summary of Contents for FCS Series II
Page 4: ...User Manual Rev B FCS Series II California Instruments 4...
Page 27: ...User Manual Rev B FCS Series II California Instruments 27...
Page 89: ...FCS Series II 89 Figure 5 1 FCS System Block Diagram User Manual Rev B California Instruments...
Page 95: ...User Manual Rev B FCS Series II Figure 6 1 Calibration Setup California Instruments 95...