User Manual – Rev B
FCS Series II
3.6.9 LAN Interface – RJ45
An optonal RJ45 Ethernet 10BaseT connector is located on the rear panel for remote control. A
standard RJ45 UTP patch cord between the AC Source and a network Hub may be used to
connect the AC source to a LAN. For direct connection to a PC LAN card, a crossover RJ45
cable is required. Consult your network administrator for directions on connecting the AC source
to any corporate LAN.
If the –LAN Ethernet interface option is present, the MAC Address (Media Access Control) of the
Ethernet port is printed on the serial tag of the power source. The serial tag is located on the
rear panel of the unit.
ies Programming Manual P/N 7004-981 distributed in Adobe PDF
format on CD ROM CIC496.
For information on how to set up a network connection or a direct PC connection using the LAN
interface, refer to the Lx/Ls Ser
LAN
Pin #
Ethernet TPE
10BaseT/100BastT/1000BaseT
EIA/TIA 568A
EIA/TIA 568B
Crossover
1
Transmit/Receive Data 0 +
White with green strip
White with orange stripe
2
Transmit/Receive Data 0 -
Green with white stripe or
Orange with white stripe or
solid green
solid orange
3
Transmit/Receive Data 1 +
White with orange stripe
White with green stripe
4
Transmit/Receive Data 2 +
Blue with white stripe or
solid blue
Blue with white stripe or
solid blue
5
White with blue stripe
Transmit/Receive Data 2 -
White with blue stripe
6
Transmit/Receive Data 1 -
Orange with white stripe
or solid orange
Green with white stripe o
solid
r
7
Transmit/Receive Data 3 +
White with brown strip or
solid brown
White with brown strip or
solid brown
8
Transmit/Receive Data 3 -
Brown with white stripe or
solid brown.
Brown with white stripe or
solid brown
Table 3-12: RJ45 LAN Connector pin out.
California Instruments
41
Summary of Contents for FCS Series II
Page 4: ...User Manual Rev B FCS Series II California Instruments 4...
Page 27: ...User Manual Rev B FCS Series II California Instruments 27...
Page 89: ...FCS Series II 89 Figure 5 1 FCS System Block Diagram User Manual Rev B California Instruments...
Page 95: ...User Manual Rev B FCS Series II Figure 6 1 Calibration Setup California Instruments 95...