59
of 148
Display of the
input/output menu
SET
RES
HOME
RETU
AUX. INPUT/OUTPUT
BIT NUMBER: 3 2 1 0
INPUT:
1 0 0 1
OUTPUT:
1 1 0
Activating/deactivating the
TEMP. / SP. VAL.
display
The [
→
] and [
←
] cursor keys are used to set the following parameters:
ON
The temperature or setpoint value is indicated.
OFF The temperature or setpoint value is not indicated.
Note:
If the temperature compensation as well as the display of delta % are active, the
temperature is indicated instead of the setpoint value.
Parameters on page 2:
Activating/deactivating the
SAMPLE SIGN
display
The [
→
] and [
←
] cursor keys are used to set the following parameters:
ON
The sample signal is indicated.
OFF The sample signal is not indicated.
Activating/deactivating the
SINGLE
-frame
/ CONT
inuous measurement display
The [
→
] and [
←
] cursor keys are used to set the following parameters:
ON
Single-frame / continuous measurement is indicated.
OFF Single-frame / continuous measurement is not indicated.
Activating/deactivating the
MAN
ual
/ AUTO
matic
range display
The [
→
] and [
←
] cursor keys are used to set the following parameters:
ON
Manual/automatic range selection is indicated.
OFF Manual/automatic range selection is not indicated.
Activating/deactivating the
LOAD
(R or Z) display
The [
→
] and [
←
] cursor keys are used to set the following parameters:
ON
The measurement process (R or Z) is indicated.
OFF The measurement process (R or Z) is not indicated.
5.4.4.10 Additional PLC input/output bits
BIT NUMBER:
Bit enumeration (0 to 3)
INPUT:
The status of the spare inputs is indicated bitwise.
OUTPUT:
The [
→
] and [
←
] cursor keys are used to select individual bits of the output.
The selected bit is marked by a dash "-".
Pressing the [F1] key (SET) sets the selected bit.
Pressing the [F2] key (RESet) resets the selected bit.
