92
of 148
MEMory:STATe:NAME
DESCRIPTION:
This supplies the ID related to a memory number (device setting).
SYNTAX:
MEMory:STATe:NAME? <number>
PARAMETERS:
A memory number between 0 and 32
QUERY FORM:
Only query form.
RESPONSE:
An ID with a maximum length of 10 characters related to the memory
number.
RESTRICTION:
This command is not permissible if a measurement is in progress or the
device is in the calibration mode.
6.3.8 REGister Subsystem
REGister:OUTPut
DESCRIPTION:
This sets/resets the 3 spare outputs.
Bit 2
Bit 1
Bit 0
SPARE OUTPUT 3
SPARE OUTPUT 2
SPARE OUTPUT 1
SYNTAX:
REGister:OUTPut <parameter>
PARAMETERS:
A value between 0 and 7. The 3 spare outputs are set/reset in accordance with
this value.
QUERY FORM:
REGister:OUTPut?
RESPONSE:
A value between 0 and 7, in accordance with the states of the spare outputs.
RESTRICTION:
This command is not permissible if a measurement is in progress or the device
is in the calibration mode.
REGister:INPut?
DESCRIPTION:
This reads in the 4 spare inputs.
SYNTAX:
REGister:INPut?
PARAMETERS:
None
QUERY FORM:
Only query form
RESPONSE:
A value between 0 and 15, depending on the states of the spare inputs.
BIT 3
BIT 2
BIT 1
BIT 0
SPARE INPUT 4
SPARE INPUT 3
SPARE INPUT 2
SPARE INPUT 1
RESTRICTION:
This command is not permissible if a measurement is in progress or the device
is in the calibration mode.
