97
of 148
6.3.10 CALCulate Subsystem
CALCulate:LIMit:STATe
DESCRIPTION:
This activates/deactivates the comparator.
SYNTAX:
CALCulate:LIMit:STATe <parameter>
PARAMETERS:
1 or ON -> The comparator is on.
0 or OFF -> The comparator is off.
QUERY FORM:
CALCulate:LIMit:STATe?
RESPONSE:
1 -> If the comparator is on.
0 -> If the comparator is off.
RESTRICTION:
This command is not permissible in the calibration mode.
CALCulate:LIMit:COUNt
DESCRIPTION:
This sets the number of limiting values ( 2 or 4 ) for the comparator.
SYNTAX:
CALCulate:LIMit:COUNt <parameter>
PARAMETERS:
2 -> 2 limiting values are set.
4 -> 4 limiting values are set.
QUERY FORM:
CALCulate:LIMit:COUNt?
RESPONSE:
2 -> If 2 limiting values have been set.
4 -> If 4 limiting values have been set.
RESTRICTION:
This command is not permissible if a measurement is in progress or the
device is in the calibration mode.
CALCulate:LIMit:RELais
DESCRIPTION:
This activates/deactivates the comparator relay.
SYNTAX:
CALCulate:LIMit:RELais <parameter>
PARAMETERS:
1 or ON -> The relay is turned on.
0 or OFF-> The relay is turned off.
QUERY FORM:
CALCulate:LIMit:RELais?
RESPONSE:
1 -> The relay is on.
0 -> The relay is off.
RESTRICTION:
This command is not permissible if a measurement is in progress or the
device is in the calibration mode.
